mChat

  • VNAF ONEMon Apr 30, 2018 2:55 am
    likes this message
    Flake wrote:
    Nodoka Hanamura wrote: But that's just me.
    Correct.
  • Nodoka HanamuraMon Apr 30, 2018 11:37 am
    likes this message
    VNAF ONE wrote: likes this message
    Flake wrote:
    Nodoka Hanamura wrote: But that's just me.
    Correct.
  • FlakeMon Apr 30, 2018 3:33 pm
    Heads up, very busy over next 2-3 weeks. Crunch time here at uni as major deliverables are falling due. I'll try and stick around to keep an eye on things but if I'm not please call on any of the other talented staff we have here. Kudos :)
  • WelshyMon Apr 30, 2018 4:13 pm
    Wait we're talented? News to the rest of us
  • DoomsdayMon Apr 30, 2018 11:46 pm
    I demand monetary payment for these so call talent you claim I have.
  • Nodoka HanamuraTue May 01, 2018 2:22 am
    I can pay you in IOUs and crumbs, that sound good?
  • decaff_42Tue May 01, 2018 2:25 am
    I pay in double-stuff oreos
  • WelshyTue May 01, 2018 9:02 pm
    I accept any payment that isnt illegal in Portugal 🇵🇹
  • SierraTue May 01, 2018 9:03 pm
    I accept payment in prescription medications, provided that you are licensed to dispense them.
  • WelshyTue May 01, 2018 9:43 pm
    Well that rules Ketamine in
  • waspe414Wed May 02, 2018 1:32 am
    I accept payment in hugs, stuffies, and baked goods, and provide the same
  • FlakeWed May 02, 2018 2:40 am
    Welshy wrote: I accept any payment that isnt illegal in Portugal 🇵🇹
    So black tar heroin works for you then?
  • WelshyWed May 02, 2018 8:49 am
    likes this message
    Flake wrote:
    Welshy wrote: I accept any payment that isnt illegal in Portugal 🇵🇹
    So black tar heroin works for you then?
  • KujoWed May 02, 2018 3:00 pm
    likes this message
    Flake wrote:
    Welshy wrote: I accept any payment that isnt illegal in Portugal 🇵🇹
    So black tar heroin works for you then?
  • KillerdeckThu May 03, 2018 9:19 am
    How is everyone this fine morning?
  • FlakeThu May 03, 2018 1:17 pm
    Goooood. Just set a new PB at the gym and the pump is real. Get hype.
  • KillerdeckThu May 03, 2018 3:28 pm
    likes this message
    Flake wrote: Goooood. Just set a new PB at the gym and the pump is real. Get hype.
  • TurbofanThu May 03, 2018 5:18 pm
  • TurbofanFri May 04, 2018 2:38 pm
    It's that time again! Friday Night Flights, I'll be on at 7:00 CDT on the Tea Tavern.
  • NeoconFri May 04, 2018 8:25 pm
    likes this message
    Turbofan wrote: It's that time again! Friday Night Flights, I'll be on at 7:00 CDT on the Tea Tavern.
  • plunderbirdSat May 05, 2018 12:56 am
    Hope all members in Hawaii are safe, due to the Earthquake and eruptions.
  • robloxTue May 08, 2018 3:47 pm
    Can someone join the server in which I am? :)
  • decaff_42Tue May 08, 2018 11:57 pm
    Is there a perl script out there that will take a DNM and extract the internally defined SRF meshes and create separate SRF files?
  • decaff_42Tue May 08, 2018 11:58 pm
    I found references to DNM Builder but that seems to be the reverse of what I"m trying to do and the links were all dead
  • NeoconWed May 09, 2018 6:04 pm
    DNM exp, I think. It's in the toolkit with the legacy tools. The biggest problem is that Blender doesn't name individual .srf meshes with the .srf at the end of the name, so you will have to go through and do that for each file.
  • NeoconFri May 11, 2018 4:22 am
    I won't be able to make it for Friday Night Flights this week due to graduation at the high school being tomorrow evening.
  • TurbofanFri May 11, 2018 3:11 pm
    ^No worries Pat! I should be online on Sunday afternoon/evening as well so if you can make it then
  • TurbofanFri May 11, 2018 9:15 pm
    Friday Night Flights tonight. I'll be on the Tea Tavern at 7:30 CDT.
  • robloxSat May 12, 2018 2:32 pm
    "somebody join me...." *in a horrific tone* :o :shock:
  • ZackSat May 12, 2018 4:02 pm
    Airshow starting in 30 min. please connect to teamspeak @ ts58.gameservers.com
  • KujoSat May 12, 2018 4:12 pm
    A little over 15 minutes remain before the YS Indian Springs Air Show kicks off!
  • FlakeMon May 14, 2018 11:46 am
    Spam bots don't want to relent tonight geez. We've been doing this for years, you aren't going to get past the admins.
  • DoomsdayMon May 14, 2018 11:50 am
    FEAR OUR MIGHTY HAMMER
  • decaff_42Tue May 15, 2018 9:41 pm
    likes this message
    Doomsday wrote: FEAR OUR MIGHTY HAMMER
    likes this message
    Flake wrote: Spam bots don't want to relent tonight geez. We've been doing this for years, you aren't going to get past the admins.
  • decaff_42Tue May 15, 2018 11:18 pm
    The airshow fever got me working on a new demo for the F-35B. Hopefully the next show will use OYS for part of it so I can fly it live.
  • TurbofanWed May 16, 2018 2:34 am
    likes this message
    decaff_42 wrote: The airshow fever got me working on a new demo for the F-35B. Hopefully the next show will use OYS for part of it so I can fly it live.
  • YSG2000Wed May 16, 2018 10:20 am
    posted a new topic: Mitsubishi F-1? in Addon Requests/Proposals
  • TurbofanFri May 18, 2018 8:45 pm
    Hey folks, FNF tonight. I'll be on the Tea Tavern at 7:30 CDT.
  • NeoconSat May 19, 2018 12:35 am
    Well, my first attempt at manual overclocking my Ryzen 1500x to 3.8GHz didn't go so well. I ended up pulling the battery and crying in the corner until it rebooted. MSI's OC Genie has it boosted to 3.7GHz and stable, so I'll stay there.
  • TurbofanSat May 19, 2018 12:56 am
    What value was it at before?
  • NeoconSat May 19, 2018 12:57 am
    OC Genie had it stable at 3.7. I just decided to try to push closer to 4.0, working slowly. I put it at 3.8 at 1.35v and it wouldn't post.
  • NeoconSat May 19, 2018 12:58 am
    Tea Tavern seems to be down.
  • TurbofanSat May 19, 2018 12:59 am
    Yep. It just went down about 20 minutes ago.
  • NeoconSat May 19, 2018 3:27 am
    I wonder what's going on with @Welshy. Meanwhile, I am now at 3.8GHz at 1.4v and improved Cinebench from 805 to 825. I'm going to try 3.9, next.
  • TurbofanSat May 19, 2018 3:36 am
    Good luck with that! :)
  • NeoconSat May 19, 2018 4:08 am
    Still at 1.4v, 3.85GHz seems to be the ceiling. I tried 3.9GHz, but Cinebench forces a shutdown. 3.85 seems pretty stable after several runs, and I am now getting scores of 840-845. CPU temp peaked at 85°C, but was hovering around 81°C with the stock Wraith Spire.
  • IndySun May 20, 2018 7:33 pm

Who is chatting

No one is chatting
Refreshes every 60 seconds