MB339 PAN

YSFlight addon development, questions, tutorials, & more!
Post Reply
DavideV
Contributor
Contributor
Posts: 373
Joined: Fri Jun 17, 2011 11:27 am
Favorite Aircraft: Aermacchi MB339, Piaggio P.180 Avanti
Location: Rome, Italy
Has thanked: 25 times
Been thanked: 26 times

MB339 PAN

Post by DavideV » Tue Aug 23, 2011 6:51 am

Hi all!

Since I started blender for repainting I feel more confident with 3d modelling, so I decided it's time to start making my YSF dream come true:

Aermacchi MB339 PAN

Image
"The only job where you start at the top is digging a hole" (from TinyTower BitBook)
Top
User avatar
Danny
Contributor
Contributor
Posts: 474
Joined: Thu Feb 10, 2011 10:33 pm
Favorite Aircraft: F-86 Sabre
Location: UK
Has thanked: 89 times
Been thanked: 71 times

Re: MB339 PAN

Post by Danny » Tue Aug 23, 2011 7:44 am

Good luck on this one Davide, YS needs a MB-339!

Here's a photo I took at RIAT last month. :)
Image
Top
DavideV
Contributor
Contributor
Posts: 373
Joined: Fri Jun 17, 2011 11:27 am
Favorite Aircraft: Aermacchi MB339, Piaggio P.180 Avanti
Location: Rome, Italy
Has thanked: 25 times
Been thanked: 26 times

Re: MB339 PAN

Post by DavideV » Tue Aug 23, 2011 8:23 am

Actually, there's already an MB339 but I have this fixation to do it from scratch... :D

Can't see your picture now, due to proxy server policies... :(
"The only job where you start at the top is digging a hole" (from TinyTower BitBook)
Top
User avatar
Martin-Dutchie
Contributor
Contributor
Posts: 482
Joined: Sun Feb 06, 2011 5:13 pm
Favorite Aircraft: F-20A Tigershark
Location: Somewhere between the dykes
Has thanked: 55 times
Been thanked: 38 times

Re: MB339 PAN

Post by Martin-Dutchie » Tue Aug 23, 2011 3:15 pm

I was planning on doing a SF-260 of the same manufacturer! I wish you a lot of luck with the aircraft, and you just made me more enthusiastic too! :D I'd love to see your progress!
Top
DavideV
Contributor
Contributor
Posts: 373
Joined: Fri Jun 17, 2011 11:27 am
Favorite Aircraft: Aermacchi MB339, Piaggio P.180 Avanti
Location: Rome, Italy
Has thanked: 25 times
Been thanked: 26 times

Re: MB339 PAN

Post by DavideV » Tue Aug 23, 2011 8:50 pm

Here's the progress... today I made the fuselage (I'll separate the canopy later)

Image

Are there too many poligons? I also hope that the YS's graphic engine will forgive me because I had to make some "guess" in the cross sections, so it's a little "bulky" when looking at it in the solid mode...
"The only job where you start at the top is digging a hole" (from TinyTower BitBook)
Top
User avatar
vandal
Veteran
Veteran
Posts: 1168
Joined: Thu Feb 03, 2011 3:16 pm
Favorite Aircraft: Tornado GR4
Location: Great Britain
Has thanked: 19 times
Been thanked: 136 times

Re: MB339 PAN

Post by vandal » Tue Aug 23, 2011 8:53 pm

Looking great, will this be high quality?
Image
Awesome 171st pilot
>>>I am the shadow, and the smoke in your eyes. I am the ghost, that hides in the night<<<
Used to be an Admin, but then I rage quit. Now just one of you normal rejects
Also known as Princess Vandel
Top
DavideV
Contributor
Contributor
Posts: 373
Joined: Fri Jun 17, 2011 11:27 am
Favorite Aircraft: Aermacchi MB339, Piaggio P.180 Avanti
Location: Rome, Italy
Has thanked: 25 times
Been thanked: 26 times

Re: MB339 PAN

Post by DavideV » Tue Aug 23, 2011 9:02 pm

Yes, I'm planning to do it detailed, but I don't really know how much detailed without being too laggy. You know, they're 10 of them! Is there any standard to follow to say "this is an high quality plane"?
"The only job where you start at the top is digging a hole" (from TinyTower BitBook)
Top
User avatar
vandal
Veteran
Veteran
Posts: 1168
Joined: Thu Feb 03, 2011 3:16 pm
Favorite Aircraft: Tornado GR4
Location: Great Britain
Has thanked: 19 times
Been thanked: 136 times

Re: MB339 PAN

Post by vandal » Tue Aug 23, 2011 9:17 pm

Nope you make it as detailed as you want. I mean look at Lordflash's Vulcans they are super detail.
Image
Awesome 171st pilot
>>>I am the shadow, and the smoke in your eyes. I am the ghost, that hides in the night<<<
Used to be an Admin, but then I rage quit. Now just one of you normal rejects
Also known as Princess Vandel
Top
User avatar
Martin-Dutchie
Contributor
Contributor
Posts: 482
Joined: Sun Feb 06, 2011 5:13 pm
Favorite Aircraft: F-20A Tigershark
Location: Somewhere between the dykes
Has thanked: 55 times
Been thanked: 38 times

Re: MB339 PAN

Post by Martin-Dutchie » Wed Aug 24, 2011 7:01 am

If you need a subtle indication:

Birdfarm F-16C blank (Animal): 722 Faces
RNAF_NF-5 (YSMajor's repaint): Around 4000 faces.
PIAGGIO_P.180_AVANTI (from Tasforce 58): around 8000 faces.
BOEING_CH-47_CHINOOK_HC2_RAF (Lord Flash): Almost 35000 faces.

Good luck with your aircraft, and it looks great so far! :D
Top
DavideV
Contributor
Contributor
Posts: 373
Joined: Fri Jun 17, 2011 11:27 am
Favorite Aircraft: Aermacchi MB339, Piaggio P.180 Avanti
Location: Rome, Italy
Has thanked: 25 times
Been thanked: 26 times

Re: MB339 PAN

Post by DavideV » Wed Aug 24, 2011 7:28 am

Wow! Well... not that detailed... :D

I'm still working on the fuselage as I realized, looking at some pictures, that I made the shape of the exhaust nozzle wrong...
"The only job where you start at the top is digging a hole" (from TinyTower BitBook)
Top
User avatar
Gunny
Business Class Membership
Business Class Membership
Posts: 3229
Joined: Sun Feb 06, 2011 6:17 pm
Favorite Aircraft: Any thing with a prop.
Location: New Iberia.LA.
OS: Windows XP SP3
Has thanked: 577 times
Been thanked: 754 times

Re: MB339 PAN

Post by Gunny » Wed Aug 24, 2011 7:38 am

Most of Lord Flashhearts detail was in the cockpits.I dont think you will find more detailed cockpits any where in Ys that will actually work on a server as long as he was the only one flying. :D
Top
DavideV
Contributor
Contributor
Posts: 373
Joined: Fri Jun 17, 2011 11:27 am
Favorite Aircraft: Aermacchi MB339, Piaggio P.180 Avanti
Location: Rome, Italy
Has thanked: 25 times
Been thanked: 26 times

Re: MB339 PAN

Post by DavideV » Wed Aug 24, 2011 5:21 pm

Rear part of the fuselage re-done. Canpoy needed extensive re-shaping because the bottom borders are straight and in the previous model were rounded, so I totally re-did the canopy and modeled the fuselage again. Vertical stabilizer and rudder added.

The canopy is separated from the fuselage, but it stell need the opening cut and transparency. i'll do it at the end. Hope you enjoy! :)

Image
"The only job where you start at the top is digging a hole" (from TinyTower BitBook)
Top
User avatar
Honey Badger
57th Polyvalent Sq
57th Polyvalent Sq
Posts: 1843
Joined: Thu Jun 30, 2011 8:17 pm
Favorite Aircraft: Anything that gets off the ground
Location: From Louisiana, stationed in Alabama
Has thanked: 226 times
Been thanked: 69 times

Re: MB339 PAN

Post by Honey Badger » Wed Aug 24, 2011 5:54 pm

Very nice! Can't wait for the release. :D
USAF Computer Systems Programmer (3D0X4)
"Powerpoint Ranger"
Top
Shutter

Re: MB339 PAN

Post by Shutter » Wed Aug 24, 2011 6:19 pm

Not bad at all. I'm impressed.
Top
User avatar
tigershark
Modding Team
Modding Team
Posts: 1445
Joined: Mon Feb 14, 2011 10:07 pm
Favorite Aircraft: uk & germany fighter
Location: gateshead/newcastle
Has thanked: 213 times
Been thanked: 568 times
Contact:
Contact tigershark

Re: MB339 PAN

Post by tigershark » Wed Aug 24, 2011 6:45 pm

remember no.10 is the stunt man on the team.

no.10 and 0 dose VOLO FOLLE
make the .dat so there can do that
Top
User avatar
Danny
Contributor
Contributor
Posts: 474
Joined: Thu Feb 10, 2011 10:33 pm
Favorite Aircraft: F-86 Sabre
Location: UK
Has thanked: 89 times
Been thanked: 71 times

Re: MB339 PAN

Post by Danny » Wed Aug 24, 2011 6:55 pm

Looking great Davide, keep up the good work! :)
Top
DavideV
Contributor
Contributor
Posts: 373
Joined: Fri Jun 17, 2011 11:27 am
Favorite Aircraft: Aermacchi MB339, Piaggio P.180 Avanti
Location: Rome, Italy
Has thanked: 25 times
Been thanked: 26 times

Re: MB339 PAN

Post by DavideV » Wed Aug 24, 2011 8:45 pm

Thank you guys! Your appreciation keep me up doing good! ;)

...and, I need to re-re-shape the back of the fuselage :( :(
"The only job where you start at the top is digging a hole" (from TinyTower BitBook)
Top
User avatar
vandal
Veteran
Veteran
Posts: 1168
Joined: Thu Feb 03, 2011 3:16 pm
Favorite Aircraft: Tornado GR4
Location: Great Britain
Has thanked: 19 times
Been thanked: 136 times

Re: MB339 PAN

Post by vandal » Wed Aug 24, 2011 8:48 pm

You're like the Leonardo da Vinci of modding.
Image
Awesome 171st pilot
>>>I am the shadow, and the smoke in your eyes. I am the ghost, that hides in the night<<<
Used to be an Admin, but then I rage quit. Now just one of you normal rejects
Also known as Princess Vandel
Top
DavideV
Contributor
Contributor
Posts: 373
Joined: Fri Jun 17, 2011 11:27 am
Favorite Aircraft: Aermacchi MB339, Piaggio P.180 Avanti
Location: Rome, Italy
Has thanked: 25 times
Been thanked: 26 times

Re: MB339 PAN

Post by DavideV » Wed Aug 24, 2011 8:55 pm

vandal wrote:You're like the Leonardo da Vinci of modding.
Ahahaha I don't know if you're talking about some artistic talen or what... :mrgreen:

The problem is that sometimes, searching for pictures of the plane, I look at some of them and I realize that I "misunderstood" some shape of the fuselage, so I have to get back on it... I want to do it good!
"The only job where you start at the top is digging a hole" (from TinyTower BitBook)
Top
DavideV
Contributor
Contributor
Posts: 373
Joined: Fri Jun 17, 2011 11:27 am
Favorite Aircraft: Aermacchi MB339, Piaggio P.180 Avanti
Location: Rome, Italy
Has thanked: 25 times
Been thanked: 26 times

Re: MB339 PAN

Post by DavideV » Thu Aug 25, 2011 8:41 pm

Allright... I had finished wings and elevator when I realized something was wrong with the shadows, so I'm getting back and I'm also re-doing the vertical stabilizer and rudder from scratch.

Image

A note for the wing: after some researches, I discovered that the Mb.339's wing profile is a NACA 64A, so I drown it on blender using a picture I found with google... here is a close view on it. And, I'm using the same profile (just scaled and made thinner) for elevator and vertical stabilizer.

Image
"The only job where you start at the top is digging a hole" (from TinyTower BitBook)
Top
Post Reply

Return to “Addon Creation”

Who is online

Users browsing this forum: No registered users and 8 guests