.FBX Help

Rsome10 · Post by **Rsome10** » Sat Oct 22, 2016 4:20 pm

Hi,

I understand this question may be a little off-topic, but please try to stick with me.

Anyways, I'm currently working on a project that needs the aircraft to be transferred to .FBX. Is there anyway to turn YSF aircraft into two .FBX files? (Gear in one, and everything else in another). And still maintain a relatively high quality model & texture? If so, I'd like some help on this.

Thanks!
Rsome10/Ryan [[email protected]]

Nodoka Hanamura · Post by **Nodoka Hanamura** » Sat Oct 22, 2016 4:22 pm

It'd be best to convert from SRF/DNM to Blend, and then Blend to FBX.

Why is it that you need them in FBX? are you running something other than Blender?

Rsome10 · Post by **Rsome10** » Sat Oct 22, 2016 4:24 pm

Nodoka Hanamura wrote:It'd be best to convert from SRF/DNM to Blend, and then Blend to FBX.

Why is it that you need them in FBX? are you running something other than Blender?

Yeah, I prefer to run a different editor. I've been having some troubles with Blender recently, because I cannot get the SRF/DNM import ability installed correctly. (But that's a whole different problem.) Any help on that?

Nodoka Hanamura · Post by **Nodoka Hanamura** » Sat Oct 22, 2016 4:25 pm

I don't know personally (I know barebones info about blender, haven't bothered to model anything outside of some cheap work for something a while back i'm not proud of), but Swift might know. I'll page him on the GrunSol discord and see if he can help out.

Swift · Post by **Swift** » Sat Oct 22, 2016 4:32 pm

What version of blender are you trying to use, cuz I know for a fact that the scripts for the 2.7+ versions of blender aren't complete.

Rsome10 · Post by **Rsome10** » Sat Oct 22, 2016 4:39 pm

Swift wrote:What version of blender are you trying to use, cuz I know for a fact that the scripts for the 2.7+ versions of blender aren't complete.

Yeah, I've been using a 2.7+ version for sure. Could you link me to the old downloads if possible?

Swift · Post by **Swift** » Sat Oct 22, 2016 4:42 pm

ah, i'll link you to 2.49b, has all the scripts you need.

viewtopic.php?p=82644#p82644

Rsome10 · Post by **Rsome10** » Sat Oct 22, 2016 4:43 pm

Thank you so much!

I'll give it a try.

Swift · Post by **Swift** » Sat Oct 22, 2016 4:45 pm

No problem, always happy to help

Barr · Post by **Barr** » Sat Oct 22, 2016 4:46 pm

Direct srf/dnm conversions aren't really too good.

I'd recommend using vrml (.wrl) or object (.obj) to transfer meshes it's old but pretty much accepted by many 3d modeling programs. I've used it to convert auto desk/solidworks/sketchup without hassle.

If your planning on taking a ys model I'd recommend you pull it up into blender remove any and all colors(use vertex paint to paint everything white) and animations (use the ipo editor), save as a .blend and the convert the parts to .obj or .wrl and import that into your program.

Rsome10 · Post by **Rsome10** » Sat Oct 22, 2016 5:28 pm

Swift wrote:No problem, always happy to help

Hey, Swift.

Okay, so I've gotten the aircraft loaded into Blender, and have 'attempted' to export to .FBX. But the texture is not transferring over. Is there a way I can locate the texture/color image? (I know how to re-paste it on once its moved.)

Swift · Post by **Swift** » Sat Oct 22, 2016 6:32 pm

that would be due to the fact that YSFlight doesn't support textures for dnm models, if I read that right.

Barr · Post by **Barr** » Sat Oct 22, 2016 7:03 pm

Rsome10 wrote:
Swift wrote:No problem, always happy to help

Hey, Swift.

Okay, so I've gotten the aircraft loaded into Blender, and have 'attempted' to export to .FBX. But the texture is not transferring over. Is there a way I can locate the texture/color image? (I know how to re-paste it on once its moved.)

There are no textures. Ys reads polygon/face colors. So DNMS/srfs are pretty much just mesh files when exported into anything else

Rsome10 · Post by **Rsome10** » Sat Oct 22, 2016 7:10 pm

Hmm, okay. Thanks for the help Barracuz and Swift.

Deleted User 1872 · Post by **Deleted User 1872** » Sat Oct 22, 2016 7:24 pm

Please do not mind me asking but which dnm are you working with?

Rsome10 · Post by **Rsome10** » Sun Oct 23, 2016 2:03 pm

Kujo wrote:Please do not mind me asking but which dnm are you working with?

An old 737 model, I can find the exact link if you'd like. (If that's what you were trying to ask.)

Deleted User 1872 · Post by **Deleted User 1872** » Sun Oct 23, 2016 5:21 pm

Alright. All I can say is dnms with a lot of moving parts will probably be more difficult to cope with so it's better to use a 37 with nothing but the main body and gear. Sorry, I wish I knew more about fbx files! ^^;

Also just a friendly reminder, check to see if the creator has a mod policy before modifying or importing it into other games

YSFlight Headquarters

.FBX Help

.FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Re: .FBX Help

Who is online

Online Servers

Become a YSFHQ First Class Member!