Note: Sorry if this is a frequent request or has been done before.
[REQUEST] Edge 540
-
Indy
- Staff
- Posts: 130
- Joined: Sat Aug 26, 2017 2:07 pm
- Favorite Aircraft: A-10C Thunderbolt II
- Location: Indianapolis, Indiana
- OS: Windows 10
- Has thanked: 189 times
- Been thanked: 109 times
- Contact:
[REQUEST] Edge 540
Looks like we don't have an Edge 540 on the forums, which is a shame for it being such a great aerobatic plane. Especially with some of the modifications they use in the Red Bull Air Races. Would anyone be willing to take a try at this one?
Note: Sorry if this is a frequent request or has been done before.
Note: Sorry if this is a frequent request or has been done before.
-
Flake
- Core Staff
- Posts: 4350
- Joined: Thu Feb 10, 2011 8:47 pm
- Favorite Aircraft: Boeing F/A-18A
- Location: Australia
- OS: Windows 10 (x64)
- Has thanked: 835 times
- Been thanked: 1238 times
- Contact:
Re: [REQUEST] Edge 540
You know, we've been looking for a decent Edge 540 in this sim for a while now. If anyone wants to make a blank mesh, that'd be a great start. Perhaps we can pool together resources on this one?
I am an accountant working full-time (and some). I'm not here as often as I would like to be. Send a message if you need me. There are a few people in the community who can get in contact with me urgently if you need - don't be afraid to ask. I just don't check here as frequently as I used to. Sorry!
-
Indy
- Staff
- Posts: 130
- Joined: Sat Aug 26, 2017 2:07 pm
- Favorite Aircraft: A-10C Thunderbolt II
- Location: Indianapolis, Indiana
- OS: Windows 10
- Has thanked: 189 times
- Been thanked: 109 times
- Contact:
-
Flake
- Core Staff
- Posts: 4350
- Joined: Thu Feb 10, 2011 8:47 pm
- Favorite Aircraft: Boeing F/A-18A
- Location: Australia
- OS: Windows 10 (x64)
- Has thanked: 835 times
- Been thanked: 1238 times
- Contact:
Re: [REQUEST] Edge 540
I can animate, so long as the model is made into seperate parts and not one blob mesh SRF.
I am an accountant working full-time (and some). I'm not here as often as I would like to be. Send a message if you need me. There are a few people in the community who can get in contact with me urgently if you need - don't be afraid to ask. I just don't check here as frequently as I used to. Sorry!
-
u2fly
- Senior Veteran
- Posts: 1247
- Joined: Fri Oct 02, 2015 9:27 am
- Favorite Aircraft: Antonov An-225 Mriya
- Location: Ukraine
- OS: Linux
- Has thanked: 744 times
- Been thanked: 276 times
- Contact:
Re: [REQUEST] Edge 540
There is 3D model for FlightGear (with geometry models in AC3D format) on Github:
https://github.com/FGMEMBERS/ZivkoEdge
The only one limitation is, that if you will use it as base, your resulted model should be licensed under same license as original one - under terms of GNU GPLv2 license (but its OK for such add-on)
http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt
https://github.com/NikolaiVChr/Blender-AC3D
https://github.com/FGMEMBERS/ZivkoEdge
The only one limitation is, that if you will use it as base, your resulted model should be licensed under same license as original one - under terms of GNU GPLv2 license (but its OK for such add-on)
http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt
P.S.: Blender 2.49b and older has inbuilt AC3D import support. For Blender 2.7x here is add-on:FGMEMBERS wrote:Flightgear Aircraft licensed under GPL clauses
https://github.com/NikolaiVChr/Blender-AC3D
U.S. Senator John McCain wrote:“Spending #NewYearsEve w/ brave #Ukrainian Marines at a forward combat outpost - we stand w/ them in their fight against #Putin's aggression”
http://pic.twitter.com/vkz0gdozVV
(31 DEC 2016)
Who is online
Users browsing this forum: No registered users and 0 guests