C05MIC's underground aerospace research facility

Personal work in progress topics go here
Post Reply
C05MIC
Rookie
Rookie
Posts: 51
Joined: Tue Mar 26, 2013 1:30 am
Favorite Aircraft: F-15S/MT Eagle+
Location: ELECTROSPHERE
Has thanked: 37 times
Been thanked: 11 times

C05MIC's underground aerospace research facility

Post by C05MIC » Fri Feb 22, 2019 3:40 am

Welcome to Datascape
Accessing Electrosphere 3.0
opening File ZX.0219

File A.V.E.A.T.O

A.V.E.A.T.O
Advanced Evolutionary Aero TechnOlogies
Research and development of highly advanced Aerospace and Materials

Subject Introduction-

Welcome to the facility where I will be posting for you updates and means of learning on aerospace design and everything YSF related when it comes to my builds and projects I will be bringing you from a just starting out learning YSF to completing aircraft and models ect.

Step by step post by post you will be able to see projects being worked on from beginning to end.

I work mainly with blender and have a passion for aerospace design.


Incoming Message-

Project Code Name [Heaven is the Sky]

Message Terminated...........
ELECTROSPHERE IS THE FUTURE......

MESSAGE TERMINATED.....

C05MIC
Rookie
Rookie
Posts: 51
Joined: Tue Mar 26, 2013 1:30 am
Favorite Aircraft: F-15S/MT Eagle+
Location: ELECTROSPHERE
Has thanked: 37 times
Been thanked: 11 times

Re: C05MIC's underground aerospace research facility

Post by C05MIC » Fri Mar 08, 2019 7:56 pm

As mentioned i would be posting my progress and thoughts consider it a journal into my life of a developer and what i deal with to put into perspective the passions that one has with the opposition that is faced in life.

here are some screens of development
3.PNG
2.PNG
1.PNG
I was able to get it into the simulator by using the default f-22 model and placement in blender to match or allign with its points
Last edited by C05MIC on Fri Mar 08, 2019 7:57 pm, edited 1 time in total.
ELECTROSPHERE IS THE FUTURE......

MESSAGE TERMINATED.....

C05MIC
Rookie
Rookie
Posts: 51
Joined: Tue Mar 26, 2013 1:30 am
Favorite Aircraft: F-15S/MT Eagle+
Location: ELECTROSPHERE
Has thanked: 37 times
Been thanked: 11 times

Re: C05MIC's underground aerospace research facility

Post by C05MIC » Fri Mar 08, 2019 7:56 pm

blenders side of development

I usually sketch out the design of what i ma conceptualizing before i shape it out in blender
5.PNG
4.PNG
Tho for the week or so distractions have come up and depression has made it hard to develop fully the aircraft with animations and features its a project that also is a concept model of what i am looking to develop learning the basics requires experimentation. But nothing beats seen your work starting to physical in front of your eyes.

Has helped me alot understand what is required to get the aircraft to work

whats next is to start working with the existing f-22 dat learning how placement is set and ofcourse animating Cockpit, wings gears ect

However lack of focus can make it a bit difficult to even start anyone deal with that??

Anyways this is the progress so far.
ELECTROSPHERE IS THE FUTURE......

MESSAGE TERMINATED.....

C05MIC
Rookie
Rookie
Posts: 51
Joined: Tue Mar 26, 2013 1:30 am
Favorite Aircraft: F-15S/MT Eagle+
Location: ELECTROSPHERE
Has thanked: 37 times
Been thanked: 11 times

Re: C05MIC's underground aerospace research facility

Post by C05MIC » Fri Mar 08, 2019 8:43 pm

Today i wanted to focus on the ability of custom models in YSFLIGHT using the Scenery Editor

I usualy always will go for a futuristic city or construct vibe hers an idea or example of just messing around in scen editor
1.PNG
THe goal is to get the most detail without using to much vertices

Also i have setup some motion paths for animated vehicles to follow a path working with elevation grids as well as lower ground dimensions
2.PNG
ELECTROSPHERE IS THE FUTURE......

MESSAGE TERMINATED.....

Grigor
Contributor
Contributor
Posts: 196
Joined: Wed Mar 16, 2011 7:57 am
Favorite Aircraft: Ball-Bartoe Jetwing
OS: Windows XP
Has thanked: 59 times
Been thanked: 113 times

Re: C05MIC's underground aerospace research facility

Post by Grigor » Sat Mar 09, 2019 4:09 am

Some sleek & interesting shapes happening there. Look forward to a release of some kind.
Keeping the poly count low is one of the challenges / pleasures of modelling in YS. I'd recommend using single .srf components and duplicating them multiple times to keep the filesize down, especially complex things like numbers and wheels. Take a look at my last release: viewtopic.php?f=169&t=10064&p=114643#p114643 which was assembled in DNMVIEWER.exe, found here: download/file.php?id=4755

C05MIC
Rookie
Rookie
Posts: 51
Joined: Tue Mar 26, 2013 1:30 am
Favorite Aircraft: F-15S/MT Eagle+
Location: ELECTROSPHERE
Has thanked: 37 times
Been thanked: 11 times

Re: C05MIC's underground aerospace research facility

Post by C05MIC » Sat Mar 09, 2019 2:06 pm

Thank you for that advice Grigor Definitely helps

Srf you say ill look into that definitely

Ill check your stuff out!
ELECTROSPHERE IS THE FUTURE......

MESSAGE TERMINATED.....

User avatar
Monoceros
Modding Team
Modding Team
Posts: 413
Joined: Mon Aug 29, 2011 6:10 pm
Favorite Aircraft: Tomcat Series
Location: Current Location
OS: Win7, Win10, MacOSX
Has thanked: 33 times
Been thanked: 122 times
Contact:

Re: C05MIC's underground aerospace research facility

Post by Monoceros » Wed Mar 13, 2019 1:29 am

I like your originals. Can't wait to see more.
Image

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest