Northern Sea Textured map

i.e. airports, maps, race courses, carrier fleets, etc.
Post Reply
ALVARR
Newbie
Newbie
Posts: 8
Joined: Sun Jan 05, 2020 8:14 am
Favorite Aircraft: F-14 TOMCAT
OS: win 7
Has thanked: 13 times
Been thanked: 11 times

Northern Sea Textured map

Post by ALVARR » Sun Jan 05, 2020 10:58 am

Screenshot16783.png
This is one of my first maps, it's just a frozen snowy island it has a simple airport, ground and sea targets, the map uses painted textures by me, no third party textures were used. This just is the initial version of the map it's not fully completed to the extent I want but ready to use and play, there are just no start positions on the aircraft carriers you can use the airport runway to get airborne or use the default start positions.

Supports endurance mode and close air support mission.

Tested on ysflight ver 20181124.
Screenshot5637.png
Modification and repaint allowed just give a mention to the original map.

Does not require custom ground object packs.

EDIT: Made on scenery editor 20180704 it may not run properly on old versions of ysflight.

EDIT: Will no longer be replying here (on this post) because I've been getting warnings for double posting (also all of them here on this very post) and don't want to get banned just joined the site and still want to hang around and contribute even if it's just a tiny bit. I obviously need to dwelve more into the forum's culture rules and adapt properly to them (possible edits of my replies below will be made to hopefully conform to the rules) until then you can still PM about the map if you need to.

To the Staff and members of the forum my sincere apologies for any rules broken. :(

Cheers ;)

EDIT: LINUX users see replies below :!:
Attachments
Northern_Seav1.zip
(13.4 MiB) Downloaded 150 times
Last edited by ALVARR on Wed Jan 08, 2020 9:43 am, edited 3 times in total.

User avatar
skatjr1204
Contributor
Contributor
Posts: 167
Joined: Tue May 31, 2016 11:31 am
Favorite Aircraft: B777/A340
OS: Windows10
Has thanked: 369 times
Been thanked: 371 times
Contact:

Re: Northern Sea Textured map

Post by skatjr1204 » Sun Jan 05, 2020 4:45 pm

Nice work!
it's awesome to screenshot:D :D
7483.png
Chief Executive Officer of Herven YSVA
RRP/Herven pack uploder : http://ux.getuploader.com/skatjr1204/
Herven YSVA Site : http://hervenysva.weebly.com/
Vingar Alliance site : http://vingaralliance.weebly.com/

User avatar
waspe414
Staff
Staff
Posts: 1341
Joined: Thu Feb 10, 2011 9:35 pm
Favorite Aircraft: Kiowa, Mitten, Hornet
Location: Canada
Has thanked: 134 times
Been thanked: 319 times

Re: Northern Sea Textured map

Post by waspe414 » Sun Jan 05, 2020 5:46 pm

I love that someone is exploring the image texture options. It's always neat to see the boundaries of YS pushed.
Actual UltraViolet
Image Image
Image
I stole your turnip. Now you must come and defend your honour. ~ Hank Green

ALVARR
Newbie
Newbie
Posts: 8
Joined: Sun Jan 05, 2020 8:14 am
Favorite Aircraft: F-14 TOMCAT
OS: win 7
Has thanked: 13 times
Been thanked: 11 times

Re: Northern Sea Textured map

Post by ALVARR » Mon Jan 06, 2020 6:05 am

More screens...
Attachments
Screenshot17795.png
Screenshot12175.png
Screenshot11577.png

User avatar
u2fly
Senior Veteran
Senior Veteran
Posts: 1339
Joined: Fri Oct 02, 2015 9:27 am
Favorite Aircraft: Antonov An-225 Mriya
Location: Ukraine
OS: Linux
Has thanked: 868 times
Been thanked: 294 times
Contact:

Re: Northern Sea Textured map

Post by u2fly » Tue Jan 07, 2020 1:25 am

ALVARR wrote:Tested on ysflight ver 20181124.

Made on scenery editor 20140909 it may not run properly on old versions of ysflight.
Strange, but with YSFlight ver 20181124 under Linux only runway texture shown correctly, rest of the island texture shown only as flat white rectangle

Image

Image

Image

Also in terminal output I found that YSFlight detect few "same-plane map groups" on this scenery:

Code: Select all

$ ysflight64_gl1
...
1 same-plane map groups.
2 same-plane map groups.
1 same-plane map groups.
2 same-plane map groups.
Waiting for thread #0 gets ready.
Thread 0 ready.
Waiting for thread #1 gets ready.
Thread 1 ready.
Waiting for thread #2 gets ready.
Thread 2 ready.
Waiting for thread #3 gets ready.
Thread 3 ready.
2 same-plane map groups.
...
FTR, There is already SceneryEditor ver 20180704 available
/!\ READ YSFLIGHT HANDBOOK (online + PDF) | updated 2019/04/25

U.S. Senator John McCain wrote:
“Spending #NewYearsEve w/ brave #Ukrainian Marines at a forward combat outpost - we stand w/ them in their fight against #Putin's aggression”
http://pic.twitter.com/vkz0gdozVV
(31 DEC 2016)

ALVARR
Newbie
Newbie
Posts: 8
Joined: Sun Jan 05, 2020 8:14 am
Favorite Aircraft: F-14 TOMCAT
OS: win 7
Has thanked: 13 times
Been thanked: 11 times

Re: Northern Sea Textured map

Post by ALVARR » Tue Jan 07, 2020 2:10 am

u2fly wrote:
Tue Jan 07, 2020 1:25 am
Strange, but with YSFlight ver 20181124 under Linux only runway texture shown correctly, rest of the island texture shown only as flat white rectangle
Tested under windows, I have no way to test it under linux.
u2fly wrote:
Tue Jan 07, 2020 1:25 am
FTR, There is already SceneryEditor ver 20180704 available
knew about it and downloaded that one from there, but the version the editor reports is 20140909.
screen.png
u2fly wrote:
Tue Jan 07, 2020 1:25 am
Also in terminal output I found that YSFlight detect few "same-plane map groups" on this scenery:
Any suggested fix?

User avatar
u2fly
Senior Veteran
Senior Veteran
Posts: 1339
Joined: Fri Oct 02, 2015 9:27 am
Favorite Aircraft: Antonov An-225 Mriya
Location: Ukraine
OS: Linux
Has thanked: 868 times
Been thanked: 294 times
Contact:

Re: Northern Sea Textured map

Post by u2fly » Tue Jan 07, 2020 3:00 am

ALVARR wrote:
Tue Jan 07, 2020 2:10 am
u2fly wrote:
Tue Jan 07, 2020 1:25 am
FTR, There is already SceneryEditor ver 20180704 available
knew about it and downloaded that one from there, but the version the editor reports is 20140909.
You should ignore which version about dialog tells (Soji always forget update info in about dialogs) and use only version mentioned in ZIP name in each YSFlight/SceneryEditor distribution.

Under Linux SceneryEditor ver 20180704 shown as "20180314" (that is also mistake)
Image
ALVARR wrote:
Tue Jan 07, 2020 2:10 am
Any suggested fix?
Could you upload ZIP with all original images that you use as textures — then I will try fix it.
/!\ READ YSFLIGHT HANDBOOK (online + PDF) | updated 2019/04/25

U.S. Senator John McCain wrote:
“Spending #NewYearsEve w/ brave #Ukrainian Marines at a forward combat outpost - we stand w/ them in their fight against #Putin's aggression”
http://pic.twitter.com/vkz0gdozVV
(31 DEC 2016)

ALVARR
Newbie
Newbie
Posts: 8
Joined: Sun Jan 05, 2020 8:14 am
Favorite Aircraft: F-14 TOMCAT
OS: win 7
Has thanked: 13 times
Been thanked: 11 times

Re: Northern Sea Textured map

Post by ALVARR » Tue Jan 07, 2020 3:17 am

u2fly wrote:
Tue Jan 07, 2020 3:00 am
You should ignore which version about dialog tells (Soji always forget update info in about dialogs) and use only version mentioned in ZIP name in each YSFlight/SceneryEditor distribution.

Under Linux SceneryEditor ver 20180704 shown as "20180314" (that is also mistake)
Image
u2fly wrote:
Tue Jan 07, 2020 3:00 am
Could you upload ZIP with all original images that you use as textures — then I will try fix it.
Thanks, I have to go now but I´ll upload them for you as soon as posible, and edit the map description too, as early as tonight or tomorrow morning. ;)

Edit: re-uploaded here: It's just the textures.
Edit: Modification/repaint (Including releasing modifications for download) or the use of these as parts in your own made ysflight maps is totally allowed given proper credit at the time of release. No commercial usage as in selling them (youtube videos usage ok ), they should remain free please.
Attachments
tex.zip
Textures only zip
(12.89 MiB) Downloaded 102 times
Last edited by ALVARR on Fri Jan 10, 2020 8:07 am, edited 1 time in total.

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests