Fenris Industries

Swift · Post by **Swift** » Tue Jan 13, 2015 2:00 am

Welcome to Fenris Industries. Feel free to post ideas and requests, even off topic stuff. Ya never know what will become a possible source for inspiration. This post was renamed from my old topic Swift's Hangar and Fenris Virtual Aerospace.

Swift · Post by **Swift** » Wed Jan 14, 2015 2:27 am

This is the F-35U, it is a modified version of the BNI Pack F-35C. Copy the data from the air_sample.lst into your main aircraft.lst file, that way you can find it easier. then place the folder F-35U into your user folder. The original plane was made by Iceman and modified by me. Please check back often for updates and enjoy!

Swift · Post by **Swift** » Thu Jan 15, 2015 5:27 am

alright, i need some comments on this thing. its the ah-69, a little testbed i made from the major pack ah-1w. i'm trying to see if a normal helo can be reconfigured to use ducted-fans instead of rotors. any thoughts on this 'contraption'?

Flake · Post by **Flake** » Thu Jan 15, 2015 5:45 am

hahaha sick! more pictures of it please?

Swift · Post by **Swift** » Thu Jan 15, 2015 5:52 am

sure, i'll upload some more pics of it tomorrow once i finally weed out all the problems with the fans. any ideas regarding other helicopters to convert?

Flake · Post by **Flake** » Thu Jan 15, 2015 6:09 am

Why leave yourself to helicopters only?

Chuck some on the A-10 - that'd be grass.

Swift · Post by **Swift** » Thu Jan 15, 2015 2:48 pm

ducted fans on an a-10? that would be epic! thanks for the idea.

Copperhead · Post by **Copperhead** » Thu Jan 15, 2015 9:44 pm

A quad rotor CH-47 gunship would be fun.

Swift · Post by **Swift** » Fri Jan 16, 2015 1:27 am

got some pics of two ducted fan helos. with what i learned from these two i'll be able to construct an a-10 and a ch-47 with ducted fans.

YouTube · Post by **decaff_42** » Fri Jan 16, 2015 1:48 am

I think you can do a lot with this. You can have a variable geometry animation tilt the fans more forward so the fuselage can stay closer to level.

Then you could do a rudder animation to make the fan housings rotate in opposite directions to spin the aircraft.

Just some ideas I got looking at these awesome addons!

Swift · Post by **Swift** » Fri Jan 16, 2015 2:00 am

already got most of the anims, the fans tilt forward and back for pitch control and they also tilt for yaw as well. my only problem is that i cant get the fans blades to spin in opposite directions. any advice?

NightRaven · Post by **NightRaven** » Fri Jan 16, 2015 2:11 am

This might sound a bit complicated, but this is how I would do it.

Go to the 6th layer (press 6 in Blender) to view all the empties. Select the empty that is the parent of the rotor you want to edit. Press Shift-S and click on snap cursor to selection. Rotate the empty around the x-axis 180 degrees. Return to the first layer (press 1) and select the rotor (it should now be upside down). Go into edit mode and press . (period, full stop whatever you call it). The rotor should now rotate around the same point as your empty provided you don't move the cursor. Rotate the rotor 180 degrees in edit mode and you should be done.

It might sound confusing, admittedly. I don't know of a simpler method unless someone else can think up of one.

Anyways, AC3 fan aren't ya? Always welcome.

Swift · Post by **Swift** » Fri Jan 16, 2015 2:16 am

screw simplicity, i'll give it a shot. thanks nightraven. and yes big ac3 fan.

Killer · Post by **Killer** » Fri Jan 16, 2015 11:33 am

How have I not stumbled across this before?

Nice stuff dude.

Swift · Post by **Swift** » Fri Jan 16, 2015 2:11 pm

thank you, i like to build radical designs. its to bad that not very many people make helos with ducted fans.

Swift · Post by **Swift** » Sat Jan 17, 2015 9:37 pm

alright, i have finally finished the ace combat 3 style yf-23. sorry it took so long, i was playing ace combat 3 on my psp.

this plane was made from copperheads personal yf-23, the original plane was made by him and i modified it. i hope you enjoy it!

Copperhead · Post by **Copperhead** » Sun Jan 18, 2015 2:10 am

Actually the original model was from CEP, but me and BravoGolf repainted it and put in our own pack. Thanks though, its pretty awesome.^

Swift · Post by **Swift** » Sun Jan 18, 2015 5:27 am

you're welcome, i kinda like it too. even the paint scheme. and for everyone else i stand corrected.

Swift · Post by **Swift** » Mon Jan 19, 2015 12:56 am

Say hello to the S/F-103, a cross between DOE's R-103 and youdontknowxpand's S-46 Orca for FSX. Tell me what you think.

Swift · Post by **Swift** » Sat Jan 24, 2015 11:51 pm

it's finally here, my version of the ada-01 adler. credits are in the readme. please enjoy!!!

YSFlight Headquarters

Fenris Industries

Fenris Industries

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Swift's Hangar

Who is online

Online Servers

Become a YSFHQ First Class Member!