NajmiCreative's Hangar

[NajmiCreative]

Welcome To NajmiCreative's Hangar
Status:Back In Business
Finally,we back!
Lists of projects= Sukhoi T-10/Su-27 Family Megapack = Chinese version Flankers left on development,more repaints coming
Ilyushin Candid's = 80% complete(more paintschemes and variants are still on research+improving gauges and instruments)
F/A-18 Series (megapack confirmed) = done on base models (needs repaints on other airforce paintschemes,give blanks to Heartbreak One for his USN Pack)
A300 Series rework = 15% complete (more paintschemes and variants are still on research)
Peninsular of Malaysia and Singapore = 60%-70% complete (on progress for ground objects and terrains)
MD-11 Pack ver 1.1 = plan to modify(according to NightRaven's resource) and reduce filesize
B737 Original/Early Series = expansion to the -200F variant(will include more variants like -100,-200/Adv/C/QC/F,Decaff-quality cockpit panels derived from 707 and 727)
A330 & A340 Series Rework = basemodels done (now for repaints) Official Page

[decaff_42]

Sounds like you got a lot of work done. Can you throw up a few screenshots? I'd love to see them!

[NajmiCreative]

actually its almost complete but I didn't yet made the MD-11 and still make some tests before released it......
plus,I also made some of the planes are the leased planes such as B707,A300B4[made and modified from the stock plane],B737-200,DC-10 and MD-11(2 liveries)

-- Fri Oct 31, 2014 11:49 pm --

you can look the pictures of the MAS pack at my new official blog here...
http://ysnajmicreative.blogspot.com/

[iqmal_97]

You're proving yourself to be quite capable at dishing out Malaysian aircraft, especially repaints. Just remember to fix some shading issues and I'll gladly fly the MAS 747.



And as a fellow Malaysian, thank you for putting our country's aircraft into the YSFlight theater.

[NajmiCreative]

Thank you...iqmal......I will release the MAS Pack as soon as possible....just 3 more planes left which is A330-200F fully functional with cargo door,MD-11F that will be also made with the cargo door and a little bit improvement for B747-400F that I want to add some more cargo door than the nose cargo door.......

-- Sun Nov 02, 2014 1:46 pm --

finally,the MASVA Pack completed.
here's the forum link to direct to the topic
http://forum.ysfhq.com/viewtopic.php?f=168&t=6562

-- Sun Nov 02, 2014 5:14 pm --

Now,I on a project to remade the Selangor Map which is to replace the old ones because it quite laggy from the 2ch ground object that I put too many on it...

-- Mon Nov 03, 2014 4:21 pm --

now,the Selangor Map has completed.....
direct link to the topic
http://forum.ysfhq.com/viewtopic.php?f=168&t=6573

-- Wed Nov 05, 2014 12:24 am --

now,I and Tigershark in a project to made the Road to Furious 7 pack...
the Idea came from on this trailer...
[BBvideo 560,340]https://www.youtube.com/watch?v=xFTsnq0XhCY[/BBvideo]
anyone who wanted to help us is allowed and open to all members....
updates would be occured in any info on the movie.....

-- Fri Nov 07, 2014 3:21 pm --

some modification of Real's A380 coming soon....
I have made some changes on the A380//

differences between the old and new



tail cam(same as the real A380)


gear camera

[Turbofan]

Major props to you for the effort on the modifications to the 380-800. If I may suggest a few things since you're trying to make it like the actual 380, disable the thrust reverser doors on the outboard engines (#1 and #4 engines). The real 380 only has thrust reversers on the two inboard engines (#2 and #3) to prevent damage to the edges of runways and grassy areas outside the runways at airports. It also prevents Foreign Object Debris (FOD) from getting launched into the engines. And if you can, modify the tail a little? Here are a few shots to help you out:

EK 388

QR 388

Diagram with some dimensions

Most notably I am talking about the tail. On the Real Pack 380, the tail is not as slender as it is on the real-world 380 (as you can tell from the photos). But this is just a suggestion and I understand if it is a bit difficult to mod it. I do like your Malaysia Airlines Pack!

[decaff_42]

Sweet work on the a380! Just out of curiosity, what program(s) are you using to do your work?

[NajmiCreative]

usually Blender (Blender Portable) but I took the modified nose from Sketchup.....my Sketchup version is the Sketchup Made cuz I can't afford to buy the Pro version....Ive use the STL file exporter and it always have issue of having many vertices.....in about 1 million to 3 millions..

-- Fri Nov 07, 2014 11:29 pm --

by the way,let's enjoy with this video
[BBvideo 560,340]https://www.youtube.com/watch?v=rBImMDDnfco[/BBvideo]

-- Fri Nov 07, 2014 11:38 pm --

in this video,the decaff's MAS B777 didnt made the font has the red clippings on the word of M,A and S like the real MAS B777...but I already fixed it in my MASVA pack..

-- Sat Nov 08, 2014 5:51 pm --

Updates on my A380

now,the A380 is almost looks like the real ones...
I have added two rudders and adjust a little bit on the tail(just like what Turbofan said)
plus made some adjustments at the tailplane



by the way,let's enjoy with this video....
[BBvideo 560,340]https://www.youtube.com/watch?v=mvnoUNzmpUU[/BBvideo]

[Greenhorn]

This is great, I love the MASVA pack! Keep up the good work man!

[Turbofan]

Nice work on the tail, looking great!

[decaff_42]

Did you make that cockpit yourself? I'm just wondering because it looks similar to the SEA Pack cockpits.

Either way, I'm really impressed with how well you are doing on this first project of yours!

[NajmiCreative]

Actually yes...I modified a little bit from YSFlight SEA A320 and A380 is also almost quite same with A320...I think I can't elaborate it more because I afraid it uses too many bytes on it...the raw YSFlightSEA A320 cockpit is around 225 thousands and I reduced it around 150 thousands or below....

[decaff_42]

I wouldn't worry much about the file size unless you were pushing about 750 kilobytes.

[NajmiCreative]

thanks for the tips....
Im also more preffered for built in cockpit in the dnm rather than srf

[decaff_42]

Yeah I totally hear you. With a moderate detail level cockpit like yours, there isn't much in the line of non-essential components for when someone looks in the window during flight. Most of the cockpit is actually the walls and be basic mesh. In that case, it is preferential to have the cockpit inside the dnm file so that you can actually see something when you look in the window.

For my aircraft I leave the basic cockpit inside the dnm, but all the instruments and high-detail stuff, I pull out into the cockpit SRF to save on rendering.

[NajmiCreative]

my first miscellaneous item in YSFlight already done!
the idea came from a early 70's movie that I watched 2-3 weeks ago
the film title is Laksamana Do Re Mi or Admirals Do Re and Mi in english....
here's the movie
[BBvideo 560,340]https://www.youtube.com/watch?v=g_0ohH-GBx4[/BBvideo]
WARNING!!!even though it has english subtitle,the song part didn't have it and I've feel it maybe did'nt funny in English....
but it really funny in Malay language...

-- Sun Nov 09, 2014 1:03 am --

I use cep's X-35 dat file for the STOVL but still gonna make some editing....

-- Sun Nov 09, 2014 11:11 pm --

now,I'm in a megaproject to made the Malaysian Peninsular and Singapore...
so far for this time I've already finished make the mountain ranges like the Titiwangsa mountain range,Benom mountain range,Tahan mountain range,East Coast mountain range(three of the mountain range which is the Benom,Tahan and East Coast mountain range made in a single Elevation grid),Bintang mountain range,Kedah-Singgora mountain range and Nakawan mountain range...
I hope Patrick would be add this map for YSCAS map rotation list when I finished it....
some question...how to put ground object on elevation grid???Is it using the move to terrain elevation or else??
what Is the map offers when it's done?
-variety of airports from the commercial/civil airport to air force base
-Langkawi Island which is you can made any airfest you made with(famous from the annual LIMA[Langkawi International Maritime and Airshow)*seriously need someone that know to made the YSFlight server that changed it's IP...
-magnificent mountain ranges
-extend flying range rather than Selangor map
-RMAF Butterworth AFB,perfect for exercise session between RMAF and YSFlight's famous squadron

-- Mon Nov 10, 2014 12:28 am --

back to progress on the A380

I have added the landing lights....same as the real ones,it's in rectangle shape....
I've also have made an A380 for MRTT(Multi Role Tanker Transporter)version that has 3 drogue and a receptacle/boom....
will be publish in 9-10 hours more cuz it's already night here......

-- Tue Nov 18, 2014 6:26 pm --

Finally,the NASA's Boeing 747SP SOFIA already done.....
here's the topic link
http://forum.ysfhq.com/viewtopic.php?f=169&t=6610

-- Sat Nov 29, 2014 1:32 am --

some more observation on Scenery Editor
maybe Patrick didn't know about this...

HOW TO MAKE GROUND OBJECT SIMULATIONS
from my observations above,I know that the ground objects can be simulate in our maps with criteria which is=
1.must have RectRegion ID no. 4(Airport Area)
2.have controllable ground object such as fuel truck
3.set the movable ground object to have flag no.7 (can be a user object)

[NajmiCreative]

Royal Malaysian Air Force Pack will be update soon (ver 1.3)
what I already do now
-remaking MiG-29N's IFR Probe

what I will do next:
-adding the CN-235 after remodeling DD-Destroyer's CN-235
-make some VIP jets that operated by RMAF
-adding Aermacchi MB399,MiG-29NUB,A400M,SU-30MKM special colour display and Smokey Bandits MiG-29N special colour display plus with 4 fictional jets from the MRCA/Multi-Role Combat Aircraft program such as Eurofighter Typhoon,Dassault Rafale,JAS-39 Gripen and F-18F Super Hornet which will be replacing F-5E and MiG-29N.....

[iqmal_97]

I never would've thought I'd see something P. Ramli related stuff appearing in YS. Thanks for making my day!

[NajmiCreative]

A400M paint=solved.....

[NajmiCreative]

MiG-29N 2011 Smokey Bandits Color Display finished...
stripes=cut
star,moon,17th sqn logo,reg no and sqn number=shrinkwrap....